7th Generation Film, Nano-Laminated Structural Blue Film
Braintec #ML90 (PURE) Pure Ghost ML90 Nano Multi-Layer ML90
By interfering with some visible light, it improves visibility from inside the car (anti-glare) and produces an elegant structural blue color.
#IRML88 (PURE) IR Pure Ghost 88 offers wide-angle, vibrant color reproduction. By reducing the amount of IR agent, this film achieves low cost and a visible light transmittance of 90.5%.
While IR Pure Ghost 88 (88.1%) sometimes resulted in a visible light transmittance of less than 70% when applied to certain types of glass, this product, #ML90 (PURE) Pure Ghost ML90 (90.5%), allows for a transmittance of over 70% when applied to current Japanese domestic vehicles.
By eliminating the blue-based IR agent, #IRML88 (PURE), although made from the same raw film as IR Pure Ghost 88, has a stronger purple color.
*Because the focus is on visible light transmittance, the heat shielding effect is lower (shading coefficient 0.92), and it does not function as a solar radiation control film.
Applied to Japanese domestic car super UV cut + IR function green glass (our measured value 73.0%): 71.10%
Applied to Japanese domestic car UV cut green glass (our measured value 79.8%): 78.76%
(Measured using JIS R3212 spectrophotometer A light source Y value)
This product can be legally applied to the windshields and front door windows of virtually all current Japanese domestic vehicles, achieving a visible light transmittance of 70% or higher.
It is manufactured using a base material from a domestic PET resin manufacturer and produced in an optical film manufacturing plant that also produces LCD panels and smartphone panels.
"Selling Points"
High Design: A blue tint reminiscent of European car glass, suitable for luxury vehicles—Structural Blue?
High Functionality: Cuts 99.9% of harmful UV rays for health benefits, and its anti-glare function blocks dazzling visible light glare, making it easier to see, less tiring on the eyes, and easier to drive. It also reduces glare from oncoming headlights at night and in rainy weather.
High Safety: Shatterproof effect allows for safe stopping of the vehicle even in the event of a windshield malfunction while driving.
Legal Application: Meets safety and vehicle inspection standards for all current Japanese-made vehicles, achieving a visible light transmittance of 70% or higher after application (*Note 1).
Features:
Weak initial adhesion allows for smooth application even on large glass surfaces and difficult-to-apply coated glass.
Uses an adhesive that is easy to remove and leaves no residue during replacement.
Anti-fouling, scratch-resistant hard coating, also used for touch panels, that maintains transmittance easily.
Highly durable base film, adhesive, and scratch-resistant hard coat with minimal transmittance change.
Tested and confirmed using the KEC method (1kHz-1GHz), which does not use metal and does not interfere with radio waves.
Color:
Structural Blue (Wide High Color Rendering)
Optical Specifications:
JIS R3212 Safety Standards for Road Vehicles (Spectroscopic Measurement Method)
Safety Standards for Road Vehicles
◇Visible Light Transmittance (A Light) 90.5%
JIS A5759 Measurements taken with 3mm glass
◇Visible light transmittance (D65 light): 88.2%
◇Visible light reflectance: 11%
◇Solar absorptance: 9%
◇Solar reflectance: 12%
◇Solar transmittance: 79%
◇Shading coefficient: 0.92
◇Solar heat gain coefficient: 0.81
(Solar heat removal rate): 0.19
(Infrared cut rate): 28.4%
◇UV shielding rate: 99.9%
(UPF rating): 50+
*Solar heat removal rate is calculated by subtracting the solar heat gain coefficient from 1.
*Infrared cut rate is the peak value at wavelengths of 780-2500nm.
*UPF rating is evaluated based on JIS L1925 by measuring the spectral transmission spectrum at wavelengths of 290-400nm.
*All numerical values listed in the product description are subject to change without notice due to specification changes, lot changes, etc.
[Specifications]
* For glass
* Professional use
* For automobiles (car film)
* Over 100 layers, nano-layered
* Uncolored, structurally colored Structural Blue
* UV cut (UV cut film)
* 99.9% UV cut (health film)
* Anti-glare function (anti-glare film)
* Shatterproof (shatterproof film)
* No radio wave interference (1k-1GHz)
* Film thickness 45μm
* Separator thickness 38μm
* Adhesive 12μm
* Scratch-resistant hard coat with stain-resistant function (scratch prevention)
* Suitable for heat-molding single-piece application
* JAN 4582455138959
