"Hyper Little Monster S" Parts Configuration:
Front Wide Fenders (Direct Replacement Type) / 35mm Wider per Side
Bonnet Extension (Compatible with Original Bonnet)
Rear Wide Fenders / 75mm Wider per Side
Side Spoiler
Split Fin
Front Under Spoiler (Compatible with Original Bumper) / 95mm Length Extension
Includes Stainless Steel Button Head Hex Screws, Instruction Manual, etc.
Option: Front Canard
The widened body size is 1,625mm overall width, with the front fenders increasing by 35mm per side and the rear fenders by 75mm per side.
Overall length is 3,490mm, an increase of 95mm.
Front and rear bumpers are compatible with the original bumpers.
Regular vehicle registration is required for driving on public roads. (Please inquire for details.)
The widened vehicle width improves cornering stability during circuit driving due to the increased tread width at both the front and rear.
Material is unpainted white gel coat FRP. Painting is required.
Installation requires modification of the original rear fender and front and rear bumpers.
Installation involves drilling holes and screwing into the front and rear bumpers, hood, and rear fender.
A special tool, a nut setter, is required for installation.
Included parts are stainless steel hexagonal button screws, bolts and nuts, stainless steel blind nuts (special tool, nut setter, is required separately), and an instruction manual.
The HLM01 model is a side-turn signal type, while the HLM02 model is the later type without side turn signals.
