C-HR ZYX11 NGX10 NGX50 Late model *October 2019 (R1) or later
Aqua MXPK10 MXPK11 MXPK15 MXPK16
Alphard AGH40W AGH45W
Alphard Hybrid AAHH40W AAHH45W
Vellfire TAHA40W TAHA45W
Vellfire Hybrid AAHH40W AAHH45W
Corolla ZWE211 ZWE214 NRE210 ZRE212 MZEA17
Corolla Cross ZSG10 ZVG11 ZVG15 ZVG13 ZVG16 MXGA10
Corolla Sports NRE210H NRE214H ZWE211H ZWE213H MZEA12H ZWE219H
Corolla Touring MZEA17W ZWE215W ZWE214W ZWE211W NRE210W ZRE212W MZEA12W
Crown ARS220
Crown Hybrid AZSH20 AZSH21 GWS224
Sienta MXPL15G MXPL10G MXPC10G
Noah MZRA90W MZRA95W ZWR90W ZWR95W *G/X/Z grades only (S-Z/S-G are on a separate page)
Hiace GDH/TRH 200 series 7th generation and later *April 2022 (R4) and later
Hilux GUN125 late model *August 2020 (R2) and later
Harrier MXUA85 MXUA80
Harrier PHEV AXUP85
Harrier Hybrid AXUH80 AXUH85
Prius ZVW51 ZVW55 late model *December 2018 (H30) and later *Cannot be fitted to PHV/GR
Yaris MXPA10 MXPA15 KSP210 MXPH10 MXPH15 *Cannot be fitted to GR Yaris
Yaris Cross MXPB10 MXPB15 MXPJ10 MXPJ15
Land Cruiser VJA300W FJA300W
Land Cruiser 250 TRJ250W GDJ250W
Roomy Roomy Custom M900A M910A Late model *From September 2020 (R2)
-LEXUS Lexus-
UX200 MZAA10
UX250h MZAH10 MZAH15
UX300e KMA10
-DAIHATSU Daihatsu-
Thor Thor Custom M900S M910S Late model *From September 2020 (R2)
-SUBARU Subaru-
Justy M900F M910F late model *From September 2020 (R2)
Uses high-power LEDs manufactured by OSRAM-
Uses high-power LEDs manufactured by OSRAM, a major German lamp manufacturer.
Combined aluminum alloy heat sinks provide stable light.
Built-in projector lens-
Built-in projector lens controls the light from high-power LEDs.
Designed to reduce glare to oncoming vehicles by creating a straight horizontal cut line.
Can be switched by turning the switch ON/OFF-
Built-in two LED chips with different lighting colors.
Designed to change lighting colors by repeatedly turning ON→OFF→ON within 2 seconds.
3 lighting colors to choose from-
Pure white equivalent to 6000K, yellow equivalent to 3000K, and warm white equivalent to 4300K can be switched between three colors by turning the switch ON/OFF.
With beam adjustment mechanism-
Designed with a beam adjustment mechanism, just like the genuine product.
The beam can be adjusted to suit your vehicle.
Bolt-on/coupler-on design-
This product is designed with an integrated bulb and light body, so it can be replaced with the original product by bolting it on.
Since it is a coupler-on design, no wiring processing is required for installation.
Notes
When re-lighting (about 3 seconds after turning it off), the circuit is designed to light up in pure white (6000K).
When switching the lighting color, turn it on/off within 2 seconds.
*There is no memory function.
The terminals may be slightly bent when installed.
Please be sure to adjust it before installing.
(If the coupler is forcibly inserted and broken, it will not be covered by the warranty)
Set contents
・Main unit: left and right (total of 2)
・2 control units
*Instructions are not included, so please have it installed by a professional shop.
Materials
Lens: PMMA (acrylic resin)
