TOYOTA
C-HR ZYX11 NGX10 NGX50 Late model *October 2019 (R1) or later
Aqua MXPK10 MXPK11 MXPK15 MXPK16
Corolla ZWE211 ZWE214 NRE210 ZRE212 MZEA17
Corolla Cross ZSG10 ZVG11 ZVG15
Corolla Sports NRE210H NRE214H ZWE211H ZWE213H MZEA12H ZWE219H
Corolla Touring MZEA17W ZWE215W ZWE219W ZWE214W ZWE211W NRE210W ZRE212W MZEA12W
Crown ARS220
Crown Hybrid AZSH20 AZSH21 GWS224
Sienta MXPL15G MXPL10G MXPC10G
Noah MZRA90W MZRA95W ZWR90W ZWR95W *G/X/Z grades only (separate page for S-Z/S-G)
Hiace GDH/TRH 200 series 7th generation *April 2022 (R4) and later
Hilux GUN125 late model *August 2020 (R2) and later
Harrier MXUA85 MXUA80
Harrier PHEV AXUP85
Harrier Hybrid AXUH80 AXUH85
Prius ZVW51 ZVW55 late model *December 2018 (H30) and later
Yaris MXPA10 MXPA15 KSP210 MXPH10 MXPH15
Yaris Cross MXPB10 MXPB15 MXPJ10 MXPJ15
Land Cruiser VJA300W FJA300W
Roomy Roomy Custom M900A M910A Late model *From September 2020 (R2)
LEXUS
UX200 KMA10 MZAH15 MZAA10 MZAH10
DAIHATSU
Thor Thor Custom M900S M910S Late model *From September 2020 (R2)
SUBARU
Justy M900F M910F Late model *From September 2020 (R2)
Can be switched by turning the switch ON/OFF
By incorporating two LED chips with different lighting colors,
the lighting color can be changed by repeatedly turning ON→OFF→ON within 2 seconds.
3 lighting colors can be selected
Three colors can be switched by turning the switch ON/OFF: 6000K equivalent pure white, 3000K equivalent yellow, and 4300K equivalent warm white.
Uses Philips LED
The built-in LED uses a high-brightness Philips LED.
Achieves brightness of approximately 1500 lumens (lm) on one side.
With beam adjustment mechanism
Like the genuine product, it is designed with a beam adjustment mechanism,
so the beam can be adjusted to suit your vehicle.
Bolt-on/coupler-on design
This product is designed with an integrated bulb and lamp body, so it can be replaced with the genuine product by bolting it on.
Since it is a coupler-on specification, it can be installed without wiring processing.
Set contents
Main unit: 1 each for left and right
Lens: PMMA (acrylic resin)
Housing: PC (polycarbonate resin)
LED housing: Aluminum alloy
