[TOYOTA]
Vellfire: TAHA40W TAHA45W
Vellfire Hybrid: AAHH40W AAHH45W
LED reflector with 3 functions-
A 3-function model with opening position, brake, and sequential turn signal.
Position: Opening light that flows when position is turned on or when returning to position. (ON/OFF not possible)
Brake: Lights up with stronger light than when in position.
Sequential turn signal: Lights up in a flowing manner from bottom to top in conjunction with the turn signal.
Built-in priority circuit-
Each function is a circuit that lights up in the following order of priority.
Brake function/Turn signal function/Position function
*When the turn signal is turned on when the brake is turned on, it will light up alternately.
Power extraction harness included-
A power extraction harness is included that does not require wiring processing on the vehicle side.
Genuine replacement type-
The main unit is installed in the same way as the genuine product.
Remove the genuine product and replace it with this product.
*A hole needs to be drilled on the back of the reflector of the bumper to pass the coupler on the reflector side.
(Please use the included drill bit, utility knife, etc. to make holes for the coupler and install it)
-With reflective function-
The lens is cut with a reflective function.
It also has the effect of diffusing the LED light.
※Even if the lighting function is not used, the vehicle inspection will be at the discretion of the inspector.
Reflector wiring specifications (insulate if there are functions not used)
Black wire: common negative
Yellow wire: turn signal positive
Red wire: brake positive
White wire: small light positive
※The warranty will not apply after processing, so please understand this before processing.
